In the pre-2018 version, frost is one of the modes in the program.
For the pre-2022 and new models, frost mode is both a separate mode and a programmable mode. The default set temperature of frost is 7 °C. However, this can be adjusted in newer models.
For the pre-2022 model, you can put the radiator in frost mode at any time by pressing the snowflake button. When in frost mode, the green moon LED will flash every 5 seconds and the screen will stay blank. You can also program anti-frost as part of the program.
For the new 2022 model, you can put the radiator in frost mode by doing the following:
1. Press the “3-lines” button successively until a snowflake icon appears on screen.
2. Press OK to confirm the mode.
3. To adjust the temperature of the frost mode, press and hold the “3-lines” button until horizontal lines appear on the screen and you enter the settings menu. You will see a small 1 in the corner of the screen.
4. Press UP successively until a small 3 appears on screen.
5. Press Ok, then use UP and DOWN to choose the frost temperature (which can be between 5 and 10 °C).
6. Press OK to confirm, and the “3-lines” button to exit the menu.
For the pre-2022 and new models, frost mode is both a separate mode and a programmable mode. The default set temperature of frost is 7 °C. However, this can be adjusted in newer models.
For the pre-2022 model, you can put the radiator in frost mode at any time by pressing the snowflake button. When in frost mode, the green moon LED will flash every 5 seconds and the screen will stay blank. You can also program anti-frost as part of the program.
For the new 2022 model, you can put the radiator in frost mode by doing the following:
1. Press the “3-lines” button successively until a snowflake icon appears on screen.
2. Press OK to confirm the mode.
3. To adjust the temperature of the frost mode, press and hold the “3-lines” button until horizontal lines appear on the screen and you enter the settings menu. You will see a small 1 in the corner of the screen.
4. Press UP successively until a small 3 appears on screen.
5. Press Ok, then use UP and DOWN to choose the frost temperature (which can be between 5 and 10 °C).
6. Press OK to confirm, and the “3-lines” button to exit the menu.