Yes.
On pre-2022 model, this energy meter shows the sum of the accumulated KWh, calculated every 24 hours.
To view the energy consumption:
1. Press and hold PROG for 2 seconds to enter the menu.
2. Press DOWN consecutively until the screen shows WAT.
3. Press OK. The screen will show the energy consumption value. This is restarted every 30 days or can be restarted by pressing DOWN for two seconds.
4. Press PROG to leave the menu.
On the NEW 2022 model, the energy consumption meter allows you to see consumption over the last 24 hours, 7 days, 30 days or since you first switched the radiator on. The guide for viewing this data is attached.
Please note: On the new 2022 model, you must set the correct wattage of the radiator in a separate menu in order for this consumption meter to work.
To do this, enter the advanced settings menu:
1. Press and hold the “3-lines” button – horizontal stripes will appear, followed by parameter 1 (with a small 1 in the corner of the screen).
2. Press UP until the screen shows “END”. Then press and hold the “3-lines” button until horizontal lines appear again, followed by a screen showing °C or °F and a small 1 in the corner.
3. Press UP until the small number becomes a 4.
4.Press OK to confirm, then use UP and DOWN to set the correct wattage.
5.Press OK to confirm then use the “3-lines” button to exit the menu.
On pre-2022 model, this energy meter shows the sum of the accumulated KWh, calculated every 24 hours.
To view the energy consumption:
1. Press and hold PROG for 2 seconds to enter the menu.
2. Press DOWN consecutively until the screen shows WAT.
3. Press OK. The screen will show the energy consumption value. This is restarted every 30 days or can be restarted by pressing DOWN for two seconds.
4. Press PROG to leave the menu.
On the NEW 2022 model, the energy consumption meter allows you to see consumption over the last 24 hours, 7 days, 30 days or since you first switched the radiator on. The guide for viewing this data is attached.
Please note: On the new 2022 model, you must set the correct wattage of the radiator in a separate menu in order for this consumption meter to work.
To do this, enter the advanced settings menu:
1. Press and hold the “3-lines” button – horizontal stripes will appear, followed by parameter 1 (with a small 1 in the corner of the screen).
2. Press UP until the screen shows “END”. Then press and hold the “3-lines” button until horizontal lines appear again, followed by a screen showing °C or °F and a small 1 in the corner.
3. Press UP until the small number becomes a 4.
4.Press OK to confirm, then use UP and DOWN to set the correct wattage.
5.Press OK to confirm then use the “3-lines” button to exit the menu.