1. Press the standby key to turn the radiator on.
2. Press standby and DOWN simultaneously. A ‘d’ will appear on screen. Wait approximately 3 seconds until the screen begins flashing a number – this is the number of the day of the week. 1 = Monday, 2 = Tuesday etc.
3. Use UP and DOWN to adjust, then leave the keypad idle for approximately 3 seconds until the screen shows a ‘h’ (for the hours). Wait again until another flashing number appears, then adjust to the correct hour with UP and DOWN.
4. Wait approximately 3 seconds when you are finished adjusting and the screen will move to ‘n’ (minutes) and then to another flashing number. Adjust with UP and DOWN.
5. When happy, leave the keypad idle. It will flash PE or PC (the sensor profile) for approximately 3-4 seconds, before exiting the menu and returning to normal heating mode.
Connecting to the app will automatically cause the time on the radiator to synchronise with the time on the app.
2. Press standby and DOWN simultaneously. A ‘d’ will appear on screen. Wait approximately 3 seconds until the screen begins flashing a number – this is the number of the day of the week. 1 = Monday, 2 = Tuesday etc.
3. Use UP and DOWN to adjust, then leave the keypad idle for approximately 3 seconds until the screen shows a ‘h’ (for the hours). Wait again until another flashing number appears, then adjust to the correct hour with UP and DOWN.
4. Wait approximately 3 seconds when you are finished adjusting and the screen will move to ‘n’ (minutes) and then to another flashing number. Adjust with UP and DOWN.
5. When happy, leave the keypad idle. It will flash PE or PC (the sensor profile) for approximately 3-4 seconds, before exiting the menu and returning to normal heating mode.
Connecting to the app will automatically cause the time on the radiator to synchronise with the time on the app.