Below is a symbols/display guide.
This control panel has 6 buttons – 4 small on the top row that correspond to icons on the screen, an ON/OFF button and a MODE button. It has a backlit screen with a timeout of 90 seconds by default – this can be adjusted.
To adjust:
1. Put the radiator in standby mode by pressing ON/OFF (the standby icon should appear).
2. Press and hold ON/OFF for 10 seconds. Press OK until the arrow on the right side of the screen points to “3”.
3. The backlit timeout time can be adjusted between 0 and 225 seconds in steps of 15 seconds by using the + and – buttons.
4. Press OK 5 times to confirm and exit the menu.
The screen shows room temperature in standby mode and set temperature in comfort, eco and anti-frost modes. In auto mode the screen can show as either room temperature or set temperature.
This can be adjusted:
1. Put the radiator in standby mode by pressing ON/OFF (the standby icon should appear).
2. Press and hold ON/OFF for 10 seconds. Press OK until the arrow on the right side of the screen points to “4”. 0 = display shows room temperature, 1 = display shows set temperature. Adjust using + and -. Press OK 4 times to confirm and exit the menu.
To temporarily see the other temperature (room or set) to what is automatically displayed on screen, press the “i” button.
