If the radiator is connected to the app, the time and date cannot be set on the radiator control panel, as it will sync with the app.
If the app is not connected, time and date can be set by following these steps:
1. In any mode, press and hold “config” until you see the programming screen. Press “config” again once. The day of the week will flash in the top corner (1=Monday 2=Tuesday etc.). Be aware, if you are looking down at the screen you might not be able to see the numbers at the top of the screen.
2. If you are taken back to a heating mode instead of the screen for setting the time, you are connected to the app and therefore cannot adjust the date and time.
3. If not, use + and – to adjust the day and press OK to confirm. Now you are adjusting the hours. Use + and – to choose the correct hour and press OK to confirm. Now you are adjusting the minutes. Use + and – to adjust the minutes and press OK to confirm.
If the app is not connected, time and date can be set by following these steps:
1. In any mode, press and hold “config” until you see the programming screen. Press “config” again once. The day of the week will flash in the top corner (1=Monday 2=Tuesday etc.). Be aware, if you are looking down at the screen you might not be able to see the numbers at the top of the screen.
2. If you are taken back to a heating mode instead of the screen for setting the time, you are connected to the app and therefore cannot adjust the date and time.
3. If not, use + and – to adjust the day and press OK to confirm. Now you are adjusting the hours. Use + and – to choose the correct hour and press OK to confirm. Now you are adjusting the minutes. Use + and – to adjust the minutes and press OK to confirm.