From manual or auto, press and hold config/prog Button for 3 seconds. You should see a screen with 0:00, a flashing 1 in the top left screen and blocks across the top of the screen. One of these blocks should be flashing. This is the program screen.
The flashing number in the top left refers to the day (e.g. 1= Monday) and the number refers to the time (e.g. 0:00 = Midnight). The blocks above the number show the modes across the day. Adjust the mode for the current hour by pressing MODE/OK to cycle through the modes.
Comfort is signified by a sun icon in the bottom right and two stacked flashing blocks above the hour in the day planner. Eco is signified by a moon icon and one flashing block. Anti-freeze is signified by a snowflake icon and no flashing block.
Once you have selected your mode, use + to move to the next hour. Repeat the process.
If you want to go back to the previous hour, press the – button. When you progress past hour 23:00, the screen will move to the next day and the number in the top left will change to 2 with the time moving to 0:00. Continue until you have set the program for the whole week. Press + when on the last hour of the week to return to heating modes. Press config” twice at any point to leave the menu.
You can also set the program via the app: On the heater screen, press ‘more’ and then go into the ‘schedule’. Press the day you want to edit. Then press the desired mode at the top and “paint” it onto the hours you want that mode. You can set the temperature of the modes by pressing ‘Set Temp’ or copy the program to other days by pressing ‘Copy Day’ and selecting the relevant days. Click ‘Back’ to return to the heating screen.
The flashing number in the top left refers to the day (e.g. 1= Monday) and the number refers to the time (e.g. 0:00 = Midnight). The blocks above the number show the modes across the day. Adjust the mode for the current hour by pressing MODE/OK to cycle through the modes.
Comfort is signified by a sun icon in the bottom right and two stacked flashing blocks above the hour in the day planner. Eco is signified by a moon icon and one flashing block. Anti-freeze is signified by a snowflake icon and no flashing block.
Once you have selected your mode, use + to move to the next hour. Repeat the process.
If you want to go back to the previous hour, press the – button. When you progress past hour 23:00, the screen will move to the next day and the number in the top left will change to 2 with the time moving to 0:00. Continue until you have set the program for the whole week. Press + when on the last hour of the week to return to heating modes. Press config” twice at any point to leave the menu.
You can also set the program via the app: On the heater screen, press ‘more’ and then go into the ‘schedule’. Press the day you want to edit. Then press the desired mode at the top and “paint” it onto the hours you want that mode. You can set the temperature of the modes by pressing ‘Set Temp’ or copy the program to other days by pressing ‘Copy Day’ and selecting the relevant days. Click ‘Back’ to return to the heating screen.